How to make a luminous liquid?

Many are fascinated by the spectacle of objects or liquids in containers that shine. Naturally, everyone is interested in how you can make a luminous liquid yourself. Just remember that the production of a glowing liquid at home is not the simplest and cleanest thing.
Everyone perfectly understands that the liquid in the dark shines for a reason. It is likely that some specific chemical processes take place in it. Do not go deep into chemistry, you just have to take it for granted that in oxygen certain substances begin to emit light rays. For this reason, so that everything went as it should, should be stocked with certain reagents. There are several recipes for making a glowing liquid.

1. You should take 2-3 grams of luminol, 80 milliliters of 3 per cent hydrogen peroxide, 100 milliliters of water, 10 milliliters of sodium hydroxide, fluorescent dyes (rubren or something like that), and test tubes. Luminol is a powder of yellow color, starting in neutral and acidic solutions to emit light blue. The first thing to do is to pour water into the flask and dissolve the luminol in it. After this, add hydrogen peroxide to the flask. There should also send iron chlorine or copper sulfate. If nothing like this, then you can use improvised means. You can squeeze a few drops of blood from the chicken thigh, dilute it in water and add 1 tablespoon of this solution to the one that is in the flask. After that, add caustic soda, stir with a wooden stick and admire the amazing glow of the blue color, which will come from the bulb. If you do not like the blue color, then you can add a little of any fluorescent dye to the solution.
2. It should take 0.15 grams of luminol, 35 grams of dry alkali, 30 milliliters of dimexide, a flask with a tube of 500 milliliters in volume, as well as a fluorescent dye. It is necessary to mix luminol, dimexide, and alkali in the flask. After this, the flask should be closed and shaken. A blue glow will appear, which can be repainted if desired. To do this, add to the composition of a little any fluorescent dye. When the luminescence is weakened, you need to open the lid, let some air in the flask.
3. You should take one tall glass, 20 milliliters of detergent solution, 10 milliliters of 3 per cent hydrogen peroxide, 5 milliliters of a 3 per cent solution of luminol, several crystals of potassium permanganate. It is necessary to pour a solution of detergent into the glass, hydrogen peroxide, as well as a solution of luminol. Separately, you need to grind a few crystals of potassium permanganate and also send them to a glass. With mixing, the mixture will start to foam, and it will sparkle very nicely.
   

At the end of the experiments, the house will have to be cleaned and wash the dishes. However, this process can be done fascinating if the room is slightly pritenit, when exposed to tap water chlorine solution luminol begins to glow.

Luminol can also be manufactured independently at home. One gram of coniferous concentrate (it can be purchased at a pharmacy) should be dissolved in water. After this, take a spoon and put a small amount of boric acid on it. One drop should be added to the spoon of the solution of coniferous concentrate and the most carefully all you need to mix. After that, the solution should be boiled over the fire until the solution boils in the spoon. It is necessary to pierce bubbles with something sharp. Then the mixture should be cooled and add a little more solution to it and then warm it again. As a result, a substance of yellow color - a phosphor. After being in the bright light, it will glow in the dark, but not for long, only a couple of seconds.