Cool model rocket or a real flying rocket without any problems can be done at home. For the work can be used any improvised materials: paper, cardboard, plastic bottles, matches and foil. Depending on the chosen master class, you can get a beautiful toy or a full-fledged model of a copy of this rocket. All descriptions are complemented by step-by-step photo and video instructions, which greatly simplifies the assembly of products. To learn how to make a rocket with your own hands and to make it fly, you can find out in detail the master classes for adults, teenagers and children described below.
How to make a rocket with your own hands so that it flies - a step-by-step master class with a description
Materials for making a flying rocket with your own hands
- paper;
- Scotch;
- piece of metal-plastic pipe;
- soft hose;
- 2l bottle.
Step-by-step master class on making a flying rocket with your own hands
- Prepare the required materials.
- To make a simple rocket from paper.
- A soft hose at one end is connected to a plastic bottle.
- Attach the other end of the hose to the length of the pipe.
- Straighten the hose. Put a paper rocket on the pipe. With all the power to stamp his foot on a plastic bottle: as a result, a paper rocket from a strong airflow will fly.
How to make a rocket from ordinary cardboard with your own hands - a diagram and a description of the work
Materials for assembling a space rocket from ordinary cardboard with their own hands
- rolls of toilet paper;
- white cardboard;
- thin colored paper (yellow, red);
- glossy self-adhesive paper;
- scissors;
- paper tape;
- red and silver paint;
- figurine of the astronaut.
Step-by-step instruction on assembling a rocket from a cardboard by the hands
- Prepare three tubes of toilet paper: one whole, the second cut into two parts, as shown in the photo. On the tube, make 3 small circles from the cardboard (to close it).
- Put the circle in the smallest tube. From the middle tube cut a piece for the subsequent installation of the figurine. Insert two more circles of cardboard into this tube (close the "capsule" from the top and from the bottom), fix all the details with paper tape. Prepare the blades of the rocket.
- Stick the blades to the rocket. Make out of paper and attach the nose. Proceed to staining.
- Dye the blades of the rocket. Stick the paper fire to the bottom of the rocket, set the figure.
- Decorate the rocket with a brilliant decor.
How to make a rocket to take off, from a bottle - a step-by-step master class
List of materials for manufacturing a flying rocket from a plastic bottle
- plastic bottle;
- sheet of plastic;
- a foamed tube;
- paper tape;
- liquid Nails;
- stationery knife, scissors;
- rubber stopper;
- thin hose.
Step-by-step master class on making a flying space rocket from a bottle
- Prepare materials for work.
- From plastic to prepare blades of a rocket.
- Cover the plastic with liquid nails.
- Glue the blades to the bottle.
- In addition, glue the blades with liquid nails.
- Cut off a piece of foam tube.
- Apply liquid nails to the bottle.
- Stick a piece of foam tube.
- Glue the blades with a paper tape.
- Cut the thin hose at an angle.
- In the rubber stopper, prepare a through hole for the hose.
- Pass the hose through the plug.
- At the second end of the hose wrap the paper tape.
- The workpieces move to the yard. To start, you need to connect the edge of the hose with the winding to the bicycle pump, and place the edge with the stopper in the bottle itself. After pumping the air, the rocket will take off sharply and high.
How to make a model of a space rocket with your own hands - an interesting master class with a photo
Materials for the manufacture of a space rocket model with their own hands
- round bars from the timber;
- plastic tubes;
- acrylic paint;
- glue.
A detailed master-class on making a model of a missile by one's own hands
- From the wooden beam, make the carrier of the rocket according to the scheme indicated.
- From wood to make and head fairings for tanks with fuel.
- According to this scheme, 6 more nozzles should be made for each tank.
- Tubes-pipes to glue to the main body, in them to establish head fairings.
- At the bottom, install the nozzles.
- The top part should be painted black.
- The bottom part is painted gray and black.