Tank of paper with your own hands

Crafts made of paper are quite popular among craftsmen and craftsmen. If you want to make a tank of paper and do not know how to do this, our article will be interesting to you. We offer you a master class with step-by-step photos, how to make an origami tank with your own hands. For greater clarity, you can use the video and outline. It is not so difficult to make a tank from a paper. The sequence of performed bends in the origami tank is easy to remember. For the correct shape of the tank model, it is necessary to monitor the uniformity of the bends and the exact coincidence of the lines with each other after the bends.

Necessary materials:

1. ordinary white paper format A 4 and square shape; (scheme)
2. scissors;
3. stationery glue.

How to make an origami tank - step by step

Execution of the shell of the tank body

1. Paper A4 is folded in half.

2. Without opening the folded paper, we make a bend on each side for another half (bend to the line of the first fold).

3. From one edge of the resulting strip - the workpiece, bend the corners on both sides (upper and lower sides) of the strip.

4. Straighten the strip - it turned out with one side flat, with another triangular shape.

5. The edges of the strip are bent to the center line of the strip and back to the edge of the strip.
6. This procedure is exactly the same done from the opposite part of the strip.

You should get the bar of the body.

Formation of the tank and caterpillars of the tank

1. Housing. Turn the work piece over.
2. The straight end is folded, as shown in the photo.

3. Further, on this bent part we add the triangular side of the strip. It should be on top of the first bent part. And we form the hull of the tank.
4. Next, we take out the paper under the corner and hide it in the corner, as shown in the video.
5. This is done on both sides of the strip. These hidden parts can be sealed for the strength of the model. You can not glue - at will.
6. The model and so will be strong. So, we formed the hull of the tank. The triangular part in the body is slightly raised to form.
7. Next, we form the caterpillars of the tank. For this, the paper under the body with the finger is squeezed forward along the entire length. The procedure is performed on both sides of the tank.

The muzzle of the tank

1. From rectangular paper we make a barrel of the tank. To do this, from the top corner of the paper, we begin to wrap it diagonally into the pipe.
2. The folding is done to the required length.
3. The remainder of the paper is cut off, and the end of the twisted piece of paper is glued together with the wrapped side of the tube.
4. Next, we cut the resulting tube by its diameter with scissors so that it becomes straight. We insert the received muzzle into the slot on the tank body.

The tank of paper is ready. How to make an origami tank? It's simple: you need care, accuracy, accuracy.