Lock-zipper is a very popular kind of fasteners. Sometimes it happens when this device fails due to breakage or disconnection of the dog. In most cases, in order to repair or replace the lock, people turn to the atelier. However, you can also restore the integrity of the fastener yourself.
How to change the dog with a zipper?
If you can not fix the dog, it must be replaced. First of all, you will have to buy a new slider. It must match the type of lightning.When choosing a slider, pay attention to the name and number. Dogs vary depending on the type of lightning: metal, plastic (tractor) and twisted.
- On the other side of the zipper, where there is a nest and a detachable limiter, put on a new dog.
- If the limiter jumped off the top of the lock, correct it with the help of pliers. The deflated limiter can be replaced by making a stitch with a few stitches using a needle and thread.
- Slightly disconnect the ends of the rails and insert them into the appropriate sides into the pawl.
- Slide the slider down.
- Press the slots on the slider using the pliers to the desired hole size.
Note! If the dog does not move, unbend the slots on it. In order not to break the rails, control the force of pressure .
Replacement of doggie with zipper trousers and bags
What if the dog broke with a zipper trousers? It can be changed with minimal effort. It is enough to scissor a small incision from both sides of the rail near the base. After that, you need to insert a working slider and push it up. The place of the cut should be sealed or sewed - below its level, the zipper will not be fastened.- First, the plastic must be broken and cleaned or cut with a stationery knife.
- Then a racer is put on the rails.
- In place of the removed plastic element, a metal stop is installed.