How to sew jeans

Quite often when buying new jeans there is an unpleasant situation - they perfectly fit the figure, but the length is too divergent with growth. No problem! Problems of this type are solved very simply and quickly, it is enough to have a thread with a needle or even better - a sewing machine. Knowing a few tricky tricks, you can easily cope with the filing of trousers. Step one
Before you start sewing, you need to determine the desired length of the jeans. To do this, they need to be put on and stand in front of the mirror. At the same time, the shoes are best removed. Excess tissue should be tucked inside and stabbed with pins previously stored. It is worth paying attention to the fold line. She should reach to the floor near the heel. If there is a little more left - not scary, this is also allowed, but only in the case when the pants are planned to be worn with shoes on heels or a platform.

Step Two
Having determined the line of the fold, you can go to the next stage and see how the chosen length will be in harmony with the shoe worn. If the mirror reflects the desired result, then on this fitting it is necessary to finish and proceed to the next steps, if not - adjust the length of the jeans again.

Step Three
It's time to start preparing trousers for sewing. To do this, they should be spread out on a flat surface and thoroughly smoothened. Then you need to fix the final length of the jeans, using a ruler and a piece of dry soap. The main thing is not to forget to draw another line, a centimeter below the main one. This distance is reserved especially for folding.

Step Four
This item is intended for those who have a sewing machine at their fingertips. First of all, you need to unscrew the jeans on the wrong side, then bend them. First on the first line, and only then on the second. If the fabric does not obey and tries to return to its original position, then it is possible to iron the place of folding with an iron. Now it's up to the sewing machine. The main thing is not to be mistaken with the color and strength of the thread.

Step Five
Now it will be a question of manual sewing, after all the machine is far not at everyone. True, it will take more time, but the result of this will not be worse. The staff should be bent over the stock line and stitched under the name "forward needle". Next is to turn the product for a second time and lightly iron it. In the end, you need to sew the trousers with a more even seam "for the needle." If everything is done carefully, then this seam will be difficult to distinguish from the machine line.

Helpful advice
If the bottom of the jeans is worn and worn, but the trousers themselves are suitable for further socks, do not despair, because coping with this problem is easy. You should purchase a regular zipper in any store for needlework. Just take it without a lock, the one that is sold for a meter. The frayed bottom of the product must be carefully trimmed, and the zipper should be divided into two parts. It is required to hold a machine stitch, attaching a snake to the edges of the trousers. The main thing is to try to sew jeans as close as possible to the lightning. The seam obtained must be wrapped inward and a second line inserted. In this case, you need to step back from the edge of the trousers about one centimeter. Thus, the bottom of the jeans will be reliably protected from wear.

Outcomes
There is no such situation from which it would be impossible to find a way out. The main desire! So now you can not worry about the excessive length of the product when buying new jeans. After all, this problem is solved very simply. Having adopted the above methods, you can do without atelier services, as well as extend the life of your favorite and familiar things, while spending a minimum of money and some free time.