Necessary materials:
- two sheets of colored paper of a square shape (yellow and green);
- ruler;
- scissors.
Narcissus of paper - step by step instruction
Building a hexagon:
- Fold the square yellow on the diagonals. One side is divided into two parts. The upper quarter is also divided into equal parts. Center the bend. Fold from the center, combining the lines of half and quarter.
- The second part of the leaf is folded to the first. Turn over the workpiece, mark the cutting line with a ruler. Cut off the unnecessary part.
- Expand the workpiece. He learned a hexagon, with which we will work further.
Flower arrangement:
- Add the figure along the diagonals from all the vertices, just make the bends between all the vertices. The total should be 12 lines.
- Bend along the lines, sharp corners fill in, lines between the tops are brought out.
- From the top of the figure, fold one and the other side of the turn half way. Repeat the same with the other three turns.
- The folded half is straightened, pressed down, folded along the lines. Repeat six times - with all the rest.
- From the bottom bend to the center of two corners.
- Straighten up, fold along the lines, combine the top edges, turn the rhombus into two sides, then fold down. Repeat six times.
- Then the most interesting. Expand the workpiece!
- Fold in half so that the sharp corner sticking out from under the paper. Combine the center of the figure with the center of the base of the triangle, built from the creases. At the bend point make a mark on the two sections.
- Repeat for all vertices. Should get a vicious circle of marks.
- On the received lines begin to fold the figure inside.
- Back to the state of the workpiece, from which we began to unfold the figure.
- Screw the folded rhombs inside the workpiece. Repeat six times.
- The remaining corners wrap up. Repeat for all angles.
- Choose a clean spread. Fold around the edge.
- Fold the corner to the center.
- Combine both additions.
- Do the same for the other side, and for the other six turns.
- Go to the middle of the flower. Combine the two faces, wrap them around the corner. Similar bends to make through one corner.
- Spread the petals.
- To revive the flower, straight angles bend outward.
Addition of petals
- Add a square of green color to the diagonals. Fold along the lines between the diagonals. Corner straighten out.
- Fold the corners from the bottom to the center.
- Unbend the corners, fold down the upper triangle.
- Begin to reveal the figure from below.
- Continue to disclose until the "boat".
- Press on the "side of the boat." Fold the figure inside.
- Repeat for the opposite side.
- Take two opposite tips.
- Pull at the same time - the tips to the sides, the bottom of the figure up.
- To grasp your fingers for the middle of the workpiece, fold them up, getting the shape of a "boat".
- Grasp the bottom of the folded "wing", pull to the center and down.
- Do the same for the other side.
- The resulting figure "flipped".
- The corners from below bend upwards.
- Again, "flip" the figure.
- Fold the corners from the top to the center.
- Expand the shape with the bends inside.
- One of the corners is bent.
- Unscrew the fold down.
- "Plant" the bud bud of narcissus.
Narcissus is graceful, even when blooming alone. Imagine how luxurious it will look like a whole bouquet made by own hands!