Design : Violetta Beletskaya
Photo : Dmitry Korolko
Style : Elizabeth Yakhno
Materials:
- Smooth wooden frame in the size of 20 x 20 cm
- Cloth crepe-satin pistachio
- Fabric crepe satin with floral ornament
- Sequins of cyclamen, marsh and lemon flowers
- Cardboard with a corrugated layer of 20 x 20 cm
- Thick cardboard with a size of 23 x 23 cm
Tools: Embroidery frame, glue gun
1. Pistachkovy color spread on the table, putting it face down. On top of the fabric, place the frame face down. Using an adhesive gun, pull the fabric on one side of the frame, then the opposite. Similarly, pull the fabric over the remaining two sides of the frame. Cut off excess fabric. Turn the frame over to the other side. Scissors in the center make a hole and cut the fabric diagonally to the inner corners of the frame, do not cut to the corners 0.2-0.3 cm. Bend and glue the "corners" of the fabric to the back of the frame, lightly stretching the fabric. Cut the excess.
2. Pull the fabric with floral ornament and fasten it in the frame. Using pajetok, select some elements of the pattern on the fabric. To fix the first solitaire, remove the needle and thread on the front side of the fabric through the hole in the sequin. With the back of the needle, attach the sequin from both sides. The second paillette is placed next to the first, sew it in the same way, etc. Paillettes of marsh color select a contour of leaves, a cyclamen - make accents on the flowers.
3. Take the lemon-colored sequins and select the middle of the large flower. Sequins should be placed in a chain of overlapping parts. To do this, remove the needle and thread on the front side of the fabric through the hole in the sequin and, fixing it only on one side, draw the needle close to the edge of the first sequin and string the next one. Each sequential sequin must be arranged in such a way that it partially overlaps the previous one. Sewing the sequins with the seam "back the needle", positioning them in a spiral and moving to the center, finish the pattern. Remove the embroidered fabric from the embroidery frame and iron it from the wrong side.
4. Using a glue gun, pull the fabric embroidered with sequins onto the corrugated cardboard. Cut off excess fabric. Insert the cardboard wrapped in a frame. With a thick cardboard, close the back of the panel, fix it with hot glue. As a fastener, glue a small loop of tape to the cardboard.
BTW
The panel with volumetric colors is embroidered with satin ribbons. To make a peony from a picked up ribbon, fold 30 cm of satin ribbon along half and along the fold line, assemble it on the thread. Fasten one end of the tape to the fabric. Fold the tape in a spiral, making the stitching stitches at intervals of 0.3-0.4 cm. To make a rose, embroider a snowflake with five rays, to the middle of which sew the edge of the tape. The other end of the tape is threaded into the needle with a wide eyelet and drag it, twisting above and under the snowflake stitches counterclockwise. Make several colors and complete the composition with a thermo-application - an embroidered butterfly.