A huge amount of emptied empty plastic bottles. But you can come up with and do many useful things from these, such unnecessary plastic bottles, and you can also make toys for children.
To make a doll you will need:
- two plastic bottles are needed for the trunk and head;
- pieces of cloth for doll clothes;
- glue "Moment";
- pieces of colored leather and plastic for the mouth and eyes, as plastic, you can take bottles from shampoo;
- for the manufacture of palm dolls need artificial leather;
- to connect the body with the head will need a piece of linoleum in size 10X10 cm;
- stockings of corporal color, elastic.
For making turtle:
- the bottom of the plastic bottle;
- 2 buttons and 2 beads (for pupils of the turtle);
- a stapler;
- scissors;
- colored cardboard.
For the manufacture of aircraft:
- clean plastic bottle;
- knife;
- scissors;
- pencil;
- cardboard.
To make a doll, we cut the bottoms of plastic bottles in the required proportions. We'll roll a piece of linoleum into the tube, then stick it into the bottles of the bottles and connect the head with the body. The head for the future doll will be covered in two layers with a stocking, we will roll the nose of cotton wool with a doll and put it under this stocking "wrapper". For strength, we fix the nose with a droplet of glue.
Then we pull the thread on top of the stocking, as well as on the crown of the puppet head, on the neck, from below. From the yarn or other material we will make the hair and attach it to the head. We cut out the face from the selected materials and attach the details of the face to the head.
From the bottle we will cut out a strip about 1.5 cm wide, this will be the frame for the hands of the doll. We put the strip in the notches in the trunk on the bottle. From the skin, we cut out the details that will represent the hands of the doll. We sew clothes for her, which will correspond to the conceived image.
We'll make a plane for the boy. On the cardboard sheet, draw the wings and the propeller. Circle the pencil neck of the bottle for the propeller, it will be the inside diameter, around it draw a circle a little more.
That the propeller does not tear, we glue it with scotch tape. Let's calculate the approximate width for the wings. In the place where the wings are fastened, we will cut the left and right with the knife and insert the wings into them, carefully put the propeller on the neck, gently push through the threads so that it rotates and tighten the lid. Do not forget the center of the wings and cut out the cockpit for the pilot.
For boys and girls, we'll make a turtle from the bottom of a plastic bottle with our own hands. Cutting the bottom of the plastic bottle, cut out a few "legs". Turn the bottom, put it on the table and bend it aside.
From colored cardboard we will cut out the belly of a turtle with legs, then we will fasten the legs from a plastic bottle and from cardboard with a stapler. For the basis of the eye, we use a detail, which we cut out of the transparent packaging from under the tablets. For the moving pupil, a bead or a small button will fit, which we put inside the transparent part.