Slippers are expensive now. So why spend extra money if you can do it yourself in just 1 hour.
You will need:
cotton fabric 30x85 cm; cotton oblique braid 2 m wide 3 cm, voluminenfliz H 630 0.25 m wide 90 cm; nonwoven fabric S520 (rigid woven liner) 0.25 m wide 90 cm; sewing thread.
Cutting:
The details of the pattern (see the drawing) are enlarged by means of a raster. In the original 1 cell = 2x2 cm. Of cotton fabric: sole - 2 parts and 2 parts in the mirror image, the top part - 4 parts; of non-woven: sole - 2 parts and 2 parts in mirror image; from volunenfleasure: sole - 1 piece and 1 detail in the mirror image, the top part - T2 parts. All the details are cut out without allowances for seams.
Description of work:
To the upper parts of the soles on the underside, glue with 1 piece of voluminfly and non-woven linen with an iron. To the lower parts of the soles on the back side, glued together 1 piece of non-woven fabric. The upper and lower details of the soles should be folded in pairs with the wrong sides and stitch the sections. The details of the upper part of the flip-flops should be folded in pairs on the wrong sides (pre-padded with details from volumerflication) and stitch the sections. Cut the top part A (see the drawing) with an oblique bake, the width of the edging in the finished form is 0.75 cm. on the stretch from * to * pull the fabric to the lower threads. The upper part is laid on the sole and swept, combining the sections, from the transverse mark to the transverse mark; assemblies are distributed evenly, with the help of assemblies it is also possible to increase or decrease the length of the corresponding section of the upper part. Slippers should be edged along the outer contours by a slanting beak, the width of the edging in the finished form is 0.75 cm. The ends of the beiki, after prying off the slices, overlap and stitch.