Lovers do and craft themselves. In this article there are several more examples of simple and original works. Any of us will cope. Such things can be made to someone as a gift.
Earrings "PERCHINKA"
You will need :
- small wooden beads of three shades
- two large wooden beads
- brown yarn
- hook number 3
- 2 pins (metal pins)
- 2 Schwenze
- round pliers.
How to do :
- Without cutting off the yarn from the skein, string down 60 small wooden beads, alternating shades.
- Then take the hook and thread the beads around the air loops by tying a single bead into the 2-3th loop. You should have a piece of air loops with beads 60-65 cm long. Secure the end with a knot. So, connect three more segments.
- Now fold each piece so that the ends are of different lengths.
- Fold one tip on each pin with a loop, securing each on the shvens.
- On the straight ends of the pins, string on a large bead. Then bend these tips with your fingers, but not until the end.
- Connect the pieces with the beads in pairs and place the bend to the loop (under the beads). Fold the eyelets all the way.
Bag in country style
You will need :
- on a piece of the main fabric and lining - on 30x150 centimeters
- 2 pieces of a basic fabric 4 centimeters long and a width equal to the width of the handles for the bag
- a variety of braid and lace - a length of 30 centimeters
- lightning - 35 centimeters
- handles for bags.
How to do
- Spread the main fabric on a flat surface. If the fabric is not very dense, you can strengthen it with non-woven fabrics.
- Then prikolite with pins the pieces of braid and lace along the width of the fabric. Then prishaitei.
- Now fold the fabric, decorated with braid, across the face inward and follow the side seams (stitch along the short sides).
- Fold in half the pieces of the main fabric for the handles, putting the handles into the bag for them, and sew to the bag.
- Stitch the lining and sew it into the bag. Then sew the zipper. Turn out the bag on the front.
If you want, you can make a bottom for the bag. To do this, you can use dense plastics, for example, a clerical folder. Wash the bag only in warm water and ivruchnu that the thing does not shed.
Brooch «Rose»
You will need :
- atlases of flowers
- thread
- needle
- pin
- candle or lighter
- universal transparent adhesive.
How to do :
- Draw, and then cut out of paper patterns of petals (three sizes) and leaves (two sizes). Fix the patterns to the fabric.
- Cut 8 large petals, 10 medium and 6 small. And also 2 leaves.
- Then, very carefully, scorch the edges of the petals and leaves. At the same time, stretch the edges slightly.
- Next, pick each petal from the bottom.
- Now, sew together 2-3 small petals. This is the middle of the flower.
- Then, sew or glue the rest of the petals around the middle: first small, then medium, and finally large. Then sew the leaves. Cut from the cloth fibers with a diameter of 3 centimeters, squeeze the edges so that they do not pour, and sew on the back of the flower. The basis was obtained, to which it is necessary to attach a pin.
Beads "Shining Amber"
You will need :
- line
- round plastic beads
- beads
- flat glass beads
- oblong irregular beads
- lock
- needle.
How to do :
- Dense plaited beads with beads. In the process, be sure to hold the toe so that the beads do not fall into the hole and fit snugly against the bead.
- Then fix the telescope on the lock and pound 3-4 oblong beads of irregular shape, alternating them with beads. Then string alternately flat beads ibusiny, which you have pierced with beads. These beads also alternate with beads. Finish the bus symmetrically.
- When the entire length of the line is filled, fix the tip of the line to the lock. Konchikleski scorch, so that the bus does not come loose. The beads are ready!
Do not throw a boring thing out of it, you can make a new stylish!
Old Turtleneck
You will need :
- turtleneck
- regular band
- yellow felt
- large beads or rhinestones of green color
- large round flat buttons of brown color on the stalk
- narrow satin lacquer green
- wide lace of suitable color.
How to do :
- Gently unhook the sleeves on the seam. Then take them and set them aside from the shoulder 20 centimeters. Cut this piece from both sleeves. It will not be of use to you any more.
- Fold the top edge on each sleeve by 1 centimeter and sew it with a small line (typewritten with a hidden seam). Leave a small piece uncrosslinked. It turns out kulisks.
- Insert the vagina by the length of the gum of the desired length and sew open edges with a secret seam. Scratchy sleeves are ready!
- Now bend the edge of the sleeves on the turtleneck by 0.5 centimeters and sew it.
- Then cut out six circles. On each edge of the edge, make dents to make the sun.
- Fold the pairwise so that the teeth do not match. Sew the details on the lace belt.
- On each side, sew on the button. Between the sunshine there are green beads and little bows of little notes. Sew a laced belt on a turtleneck.
Brooch "Flower"
You will need :
- chiffon
- cloth-button
- glutamicas
- beads for pearls
- beads
- fastener.
How to do :
- Cut out a chiffon strip with a size of 65x10 cm. Sew a short side. Then fold the piece along in half and stitch along the long edge.
- Pull the thread, form a flower and fasten it.
- Orienting the photo, shred the center of the button with beads, and paste the rhinestones along the edge.
- Sew the button in the center of the flower. On the reverse side, sew a fastener-pin. Glue on the flower of rhinestones.
Bracelet "Chic"
You will need :
- Wire with memory effect for bracelets
- nippers
- round pliers,
- various beads
- beads.
How to do :
- Measure out the turn of the wire and cut with a wire cutter. Slightly stretch the wire to make it more convenient to work.
- One end of the wire bend a small ring with the help of round-nosed pliers, so that in the process of working beads do not fall down.
- On the loose end of the wire string the beads, alternating each with a bead.
- When the entire cut is filled, bend the tip of the wire with a small ring.
Clutch "Sea beads"
You will need :
- weave the clutch
- canvas, thin tape
- line
- beads and beads
- needle for beading
- adhesive for fabric.
How to do :
- Measure the valve (cover) of the clutch. According to the measurements taken, cut out the desired length from the canvas.
- Sew the embossed edge of the canvas from all sides with a thin braid so that it completely covers the ribbon with a braid.
- Then gustoryshite a piece of canvas beads and beads, so that the entire canvas was fullyfilled.
- Stick the decoupled section of the canvas onto the clutch valve. Wait until the glue dries.
If your crochet has a strap, then you can also trim it with beads.