Beautiful white bows for September 1 with their own hands (from satin ribbons and Kanzash) Master classes with step-by-step photos and videos

Make bows on September 1 with your own hands - a task that any mom can easily cope with. Moreover, on the vastness of the Internet you can find so many interesting and original versions of any complexity! You can start creating a small decorative masterpiece with only a ribbon, scissors, a needle and a thread, a few ornaments in the form of sequins, beads or pearls at hand ... Well, a little bit of fantasy and desire, of course.

Bows for September 1 from the satin ribbon with their own hands, master class with photo and video

The creation of a small masterpiece from satin ribbons or organza is an interesting and fascinating process. Especially, how to make bows on September 1 with your own hands - you can learn from training videos, master classes with photos of all stages or at specialized forums. One of these ornaments can try to create right now.

Materials and tools for satin bows with their own hands

• 2 cut of a satin ribbon measuring 5 * 18 cm + 3 cut of a satin ribbon measuring 2.5 * 8 cm
• 2 cut of a ribbon ribbon measuring 4 * 17 cm + 1 cut size 4 * 16 cm + 1 cut 2 * 8 cm
• Circle cut from felt with a diameter of 4 cm
• Scrunchy
• Needle with thread
• Decorative beads
• Glue gun
• Lighter

Step-by-step instruction on how to make a satin bow on the festive line of September 1

1. We make the basis for the future of an elegant accessory. To do this, we add our satin cuts 5 * 18 cm in half, then press the ends of the cloth to the fold line and sew them with a thread. We fasten both parts of the atlas, we tighten it. The resulting double bow is secured by intercepting it in the middle with a thread. Straighten the workpiece of our jewelry.
2. A similar process is done with two sections of a ribbon tape measuring 4 * 17 cm.
3. We make a single bow made of reps material 4 * 16 cm in size, we add decorative ends to it. To do this, fold along, and then - across, a cut of 2 * 8 cm, cut the ends obliquely and thread the fabric onto the thread along with a 4 * 16 cm bow. To prevent the fabric from humming, treat its edges with a lighter or a burning candle.
4. We begin to collect our accessory. First, glue the smallest ribbon bow on the bow of the same material that is larger in size.
5. The resulting multi-layered bow from the ribbon tape is glued to the satin stock.
6. To decorate the hair bands, let's take a satin fabric piece of 2.5 * 8 cm, fold it along in half, fasten the edges with the lighter. From the underside of the bow we glue one edge of this tape.
7. Turn around the center of our decoration with this tape, parallel twisting it twice.
8. The remaining edge is fixed with the help of a glue gun from the wrong side
9. The remaining 3 sections of the satin ribbon are superimposed on each other at a slight angle, the letter "L", glue them together, process them and attach them to the back of our accessory.
10. We decorate the satin ends of the bow at your discretion - for example, using beads or pearls.
11. It remains to attach a hair elastic to the decoration. To do this, add a circle of felt twice and make two parallel incisions to get the "loops".
12. We pass a thin ribbon into the resulting loops, then, by gluing a little glue in the middle of the mug made of felt, we glue the elastic band. We wrap the elastic band with a ribbon and put free ends outside the felt base.
13. We fix the free ends of the tape to the felt with glue, we cut off the excess.
14. We glue the felt with the elastic band on the back of the bow.

Lush white ribbons from satin ribbons on September 1, photo

And here, what interesting decorative ornaments in the form of bows from organza can be created by oneself. These accessories, no doubt, like not only schoolgirls, but also more adult women of fashion. And they will want to try on them not only on the Day of Knowledge.

White bows for September 1: how to effectively tie an ornament

For unusual, but at the same time, not too complicated hairdress for a girl on September 1 with white bows, we will need: two narrow white satin ribbons, two hair bands, two hairpins in the form of beautiful lush white bows.

• We divide the hair into a straight part, and then, on each side, we select two small strands on the vertex.
• A shawl from the allocated locks of a pigtail, in parallel weaving in them a white tape. We fix braids with elastic bands for hair.
• Cross the pigtails, collect the loose strands and our pigtails in two tails. We fix hairdress with elastic bands for hair, we adorn with magnificent white bows.
• If desired, the ends of the tail can be wound on a curling rod - so the hair will get even more festive look.

When creating an elegant hairstyle on long hair, the flight of fantasy in general is unlimited. Here is another example of how to quickly and effectively tie white bows on September 1.

• Collect the ponytail on the back of the head with a conventional hair band.
• We take a long satin ribbon about 4-5 cm wide and stretch it through the elastic band so that the free bottom end is about 2/3 of the length of the entire ribbon.
• Begin to weave from the tail of the pigtail, weaving the strands of the lower end of the ribbon. We fix the pigtail with a rubber band.
• We twist the "bun" from the pigtail, securely fixing the hair with a pair of pins.
• Loose ends of the tape wrap around the hair and tie a bow.

Variants of interesting solutions with white bows - a great many. As, for example, it is original to beat a usual satin ribbon in a hairdress - it is shown in a photo:

As you can see, a beautiful school hairstyle does not need to be crowned with a huge white bow. It is easy to replace the modest, neat bows from the ribbon.

Bans-kanzashi (kandzashi) for September 1, own hands, master class with photo

The technique of Kanzashi (kandzashi) is loved and respected by craftsmen. The mysterious name of "Kanzash" - originally from Japan, where for the first time they began to make flowers for decorating dresses and hairstyles of geisha from bright silk fabric cuts. Modern moms can also easily master the art of creating kanzashi bows for September 1 with their own hands.

Materials and tools for making holiday bows in Kansas technique

To make an unusual satin decoration we will need:

• A satin ribbon with a width of 5 cm
• Motok satin ribbon width 2.5 cm
• Thin silver ribbon 3 mm wide
• Basis of felt with a diameter of 5-5.5 cm
• Decorative bead
• Needle with thread
• Scissors
• Lighter
• Glue gun
• Scrunchy

How to make beautiful kanzashi bows for a ruler on September 1, photo by step

1. We make 6 cuts measuring 14 * 5 cm, 6 cuts measuring 10.5 * 2.5 cm, and also cut a narrow silver ribbon: 6 pieces measuring 150 * 3 mm and 6 pieces measuring 80 * 3 mm. We process the edges of the ribbons with a cigarette lighter, take wide cuts with a width of 5 cm, fold them in half and assemble them on a string.

2. We pull the thread in such a way that we have a flower. Straighten it and put it off for a while.

3. A similar process is done with cuts of 10.5 * 2.5 cm.

4. We glue the pieces of a narrow silver ribbon in the form of petals.

5. Paste the resulting delicate petals on a wide bow.

6. On top of the flower we paste a bow from the cuts of 10.5 * 2.5 cm

7. Still we will make openwork petals from a silvery tape, but already we use for this purpose lengths of 8 cm. We paste the resulting petals on top of a small bow, decorate our accessory with a decorative bead.

8. Felt base is pasted from the underside of the decoration. On the base we attach the hair elastic. Our ceremonial bow of Kanzash is ready!

A beautiful fluffy organza bow for a girl on September 1 with her own hands

Does your schoolgirl prefer big bows? "Then we'll make a magnificent bow for us by September 1st."

Materials and tools for lush bows on the Day of Knowledge

We need:

• A small piece of white organza
• 1 m organza ribbon
• Decorative stone for bow decoration
• Needle with thread
• Lighter
• Scissors
• Scrunchy
• Glue
• 2 stencils with a diameter of 14 and 11 cm

A step-by-step guide on how to make your own hands with curvy organza bows

1. Cut out from the organza on the stencils of 5 circles with a diameter of 11 and 14 cm. For each detail, we melt the edges with the help of a cigarette lighter. Fold the work pieces in half, the inside out. We sew each part along the edge with a thread, retreating from the edge of 0.5 cm.

2. We pull the fabric in such a way that the petal turned out. We fix each such petal with a thread at the base.

3. In parallel we fasten the thread of 5 petals of the same diameter. We have obtained blanks of two flowers - larger and smaller.

4. We combine both flowers and pierce them in the center - a multilayer bow-flower has turned out.

5. In the center of the flower we fix the decorative stone.

6. From the wrong side, we attach the hair elastic.

7. Between the tiers of the flower we tie a few ribbons of organza about 30 cm in size. Our beautiful lush bow for September 1 is ready!