Materials:
- Smooth wooden frame measuring 15 x 20 cm
- Cloth crepe-satin of golden brown color
- Fabric crepe satin with floral ornament
- Small beads of lime, lilac and pink flowers
- Large pearl beads in dark pink color
- B glass of pink color
- Cardboard with a corrugated layer measuring 15 x 20 cm
- Thick cardboard size 18 x 23 cm
1. Crepe-satin golden brown spread on the table, laying face down. On top of the fabric, place the frame face down. Using an adhesive gun, pull the fabric on one side of the frame, then the opposite. Similarly, pull the fabric over the remaining two sides of the frame. Cut off excess fabric. Turn the frame over to the other side. Scissors in the center make a hole and cut the fabric diagonally to the inner corners of the frame, do not cut to the corners 0.2-0.3 cm. Bend and glue the "corners" of the fabric to the back of the frame, lightly stretching the fabric. Cut the excess.
Pull and fasten the fabric with floral ornament in the embroidery frame. To make a contour embroidery with beads, bring the needle and thread to the front side of the fabric, string the desired number of small beads of light green color. Pass the needle to the wrong side at the end of the bead string. Bring the needle to the front side at the beginning of the row, draw it through a series of beads and again prick at the end of the row, etc. Embroider the other elements of the ornament, using a small purple and pink beads.
2. To make a flower, bring the needle to the front side and string 6 small pink beads on it. Slide the needle into the hole through which it was removed to form a ring.
3. String the seventh bead and pass the needle to the wrong side in the center of the ring so that it takes up the middle of the ring. Stitches on top of the thread between the beads, fix the ring of beads on the fabric. Large pink beads are fastened to the fabric with a double stitch.
4. To fix the glass bead to the fabric, use the seam "pin-fast". On the needle removed to the front, string down the required number of bugles and move the needle to the wrong side at the end of the row of sticks. Bring the needle to the front side between the first and second stick and perform a straight stitch on top of the thread between them. Secure all the sticks of the row. When the embroidery is finished using a glue gun, pull the embroidered fabric onto the corrugated cardboard. Cut off excess fabric. Insert the cardboard wrapped in a frame. With a thick cardboard, close the back of the panel, fix it with hot glue. As a fastener, glue a small loop of tape to the cardboard.