The main problems are:
- There are sticky spots on the floor;
- At the front door there is dirt;
- On the floor black stripes from the rubber sole.
What you need for this:
- Shady ball or clean sock;
- Cotton swabs or napkins, baking soda;
- Means for the care of the floor of wood, mop and a rag from microfiber;
- Plastic spatula or ice;
- Alcohol.
How to delete?
1. Remove the black stripes from the floor .
On the rubber shoe soles it is most convenient to walk, it does not slip, but it has a drawback. On the floor, after this shoe, there are black marks that are not washed after wet cleaning. Do not get upset, the mud will not penetrate the inside of the cover, and it will not be difficult to remove it. If this is a small mark, then you do not even have to bend over, you can just rub it with your toe. With the help of a tennis ball you can get rid of the stripes, enough to rub them the floor, but this way will work on the laminate, parquet, linoleum. If you can not remove the strip, you need to pour a little bit of soda on a damp cloth, and gently rub it, rinse it off and wipe it dry.
2. We will clear the entrance.
If a dark strip formed over the entrance door, then wet cleaning is needed. Do not wash the wooden cover with a wet mop, they do not like moisture. To do this, you can use a special tool "Pronto for floors" for washing the wooden floor. With this tool, treat a small area of the floor, and then remove the dirt with a damp cloth from the microfiber. Allow to dry, and if necessary repeat the procedure. Then the floor surface is treated with a floor care agent made of wood, it will give it a shine.
3. Remove the sticky spots .
Paints, chewing gum, resin and plasticine by themselves will not disappear, solvents will not help to cope with such a problem, they will not be suitable for wooden floors. In order not to damage the sexes, put a few ice cubes in the package and "blur" this spot. Then use a spatula carefully to remove the pieces. To remove droplets of the helmet from the floor, you should moisten the cotton swab in alcohol and squeeze it for a few seconds to the spot, and then clean it with a spatula. If there is still paint left, use baking soda, and proceed as in step 1.
Any floor, board unpainted or dyed, made of plastic, parquet or linoleum, requires daily, constant care. This washing, cleaning from dust, rubbing the floors, which protects the floor from damage, and serves to maintain a beautiful appearance. Smart, clean floor contribute to well-being and mood, because in the room air is always in continuous motion, and thus, raises dust, and if this dust is not removed by vacuuming or wet cleaning, we will inhale it. When you returned home from a walk, from work, put on your home slippers. And then you will rest your feet and you can not bring dirt and dust into the rooms.
Every day, wipe under chairs, sofas, beds, dust accumulates there. When sweeping, brush the wipe with a damp gauze, and let the bristles out.
Often, use a vacuum cleaner. We must admit that we underestimate it. Usually we get it for cleaning clothes, upholstered furniture, clothes, carpet cleaning, and much less often we vacuum the floors, and they are a source of dust in the room. The vacuum cleaner can choose dust from the pores and crevices of the wooden floor, which can not be reached either with a damp cloth, a broom, or a brush. If you remove the brush from the vacuum cleaner, you can get this dust from central heating radiators, under the cabinets and so on. At your discretion, if you build up the hose, then you will work and not get tired, you do not have to bend over.
The better to wash?
Boardworn unpainted floors are washed with lukewarm water, you can add detergent or soda (three tablespoons per 1 bucket of water) to it. Use a bare broom or root brush. The heavily dirty floor is well wiped with burlap or a stiff brush, then with a mixture of 300 g of sand and 100 g of freshly lime and washed with water. If after such a departure some stains remain on the floor, they should be covered at night with moist gray or white clay, which in the morning should be washed with warm water.
To remove greasy stains from the unpainted floor, they must be washed with gasoline, sprinkled with potato flour and ironed with a warm iron through a napkin. You can make a gruel of gray, white clay and vinegar and this gruel to cover for the night stain, and in the morning to wash with water.
Painted wooden floors last longer and look more elegant than unpainted floors and are easier to care for. To wash the floors in warm water add ammonia alcohol, add 2 tablespoons of ammonia to the bucket of water, this will give them shine. This effect can be achieved if you rinse the washed floor with water and vinegar, add a glass of vinegar to a bucket of water. Adding soap or soda will cause the paint to fade, darken.
If you shed fat on the painted floor, you should pour it with cold water, and only then the frozen fat can be easily removed with a knife.
Boarded painted and unpainted floors should be washed with a special liquid for the floor, using liquid substances such as Sosenka-2, Aid, Sosenka-3 and other means.
To another time it was easier to take care of the floor:
- Take off and leave shoes at the front door;
- Vacuum the floor at least once a week;
- For the care of the wooden floor, purchase a special tool. Washing the floor is best with a steam floor mop, it is suitable for flooring from wood and parquet, as well as for cleaning the surface of linoleum, stone, tile, marble.
Now we know what to wash the painted floor. Take advantage of our advice, and your floors will always be clean.